Entry ModeliDS®-mini
Introductory system that realizes low cost and space saving for small-scale production , research and development
The advanced coating system iDS-mini is a next-generation arc ion plating machine for small-scale production and R&D that enables even lower cost and shorter cycle coating process by downsizing the iDS-500® but maintaining its excellent performance.
- By installing the Steer one evaporation source, low material cost and high smoothness coating are available.
- By adopting a rectangular flange, it is possible to mount a conventional 2S evaporation source or sputter source as well.
- High-power heater is used to significantly reduce the heating time of the base material.
- Space-saving design with a small footprint.
- Equipped with the basic specifications as an introductory machine, the minimum plasma source installation is ideal for research machines.
- Wide variety of specifications according to customer's request.
- Simple and easy to maintenance design
Standard Specification
Advanced Coating System iDS®-mini | |||
---|---|---|---|
Recommendation coating zone | (1-stage specification) φ450×H180[mm] (2-stage specification) φ450×H420[mm] |
Number of arc evaporator | 3 units or 6 units |
attached fixture table | 6-axis revolution | Coating method | Cathodic arc ion plating method |
Substrate etching method | Gas Bombardment, Metal Bombardment | Arc Evaporator Unit | 2S evaporator,Steer One Evaporator,Sputter evaporator |
Number of doors | 2 Doors | Process Gas | 4 Lines (Standard) |
Heater | Equipped as standard | Temperature measurement monitor | Standard(2 thermocouple measurements) |
Main Pump | Turbo Molecular Pump | Recommended Installation Space | W3500×D5200×H3000[mm] |
Weight | Main frame weight Approx. 2300Kg Power / control panel weight Approx. 2000Kg |
Option | evaporator shutter sputtering sources |
Past combination table of systems and sources
Coating machine\Arc evaporator | 2S Evaporator | 2SD Evaporator | 3S Evaporator | Flat 3S Evaporator | Steer One Evaporator | MFA Evaporator | sputter Evaporator |
---|---|---|---|---|---|---|---|
iDS®-mini | 〇 | × | × | × | 〇 | × | 〇 |
After-sales support
We offer various services such as Inspection diagnosis ,parts exchange , on-sight service, overhaul to make customer purchased system to be stable, operatable, keeping performance.
- Remote Support
- On-site Support
- Machine rental service
- Technical support
- Regular inspection, overhaulPDF
- Send back overhaul
ITF option
We are preparing many options according to customer's request.
For example, we manufacture fixtures that match the customer's base material, modify equipment, etc.
Please feel free to contact us when you purchase the equipment, even after the purchase.
- Alarm mail function
- Remote monitoring
- Remote diagnosis
Advantages of ITF fine coating equipment
Since 1985, we have been developing Coating machine using arc discharge. ITF coating machine is based on high-voltage technology and vacuum technology, and the technology created by many years of research and development is applied. It is a coating machine with high performance such as film smoothness and excellent cost performance.
smoothness of film
ITF coating machine can keep productivity and coat high quality film.It reduces droplets that occur and stick, as much as possible and coat a highly wear-resistant film.
We have prepared sample coating pieces for various films.Please contact us
Lineup of coating machine model
and Arc evaporator
We will make the best proposal from various coating machine models and arc evaporator.
We will propose the most suitable coating machine for the film type, production scale, and budget of the customer.
Reasonable price
Each and every one of our machine is manufactured at our factory in Kyoto, Japan, under the ISO 9001 system of strict quality standards.
Most of the major parts are made in Japan and assembled in our factory, and basically sell to customer directly with more reasonable prices than other companies.